GG&G Aimpoint T-1/H-1 Bolt On Mount With Lens Covers
Out of stock (availability represents online inventory only)
SKU
GGG-1408
Easily installed.
•Ergonomic design.
•Both the Aimpoint T-1 Mount and H-1 Mount provide a solid bolt on squeeze rail mounting system with a single recessed side bar and recessed socket head cap screw.
•The Aimpoint Mount includes a custom prepared lens cover for the objective lens and an integral lens cover for the ocular end of the scope.
•The Aimpoint T-1/H-1 scopes easily install onto the T-1 Mount and the H-1 Mount with four 3mm screws. The installation wrench is included.
•Designed to mount directly to the AR-15/M16 upper receiver’s dovetail. This location places the red dot just above the front sight post.
•The Aimpoint T-1 Mount is low enough to allow "Absolute True Co-Witnessing" with back up iron sights like the GG&G A2 BUIS and MAD BUIS.
•The T-1/H-1 Mount With Lens Covers is manufactured from solid billet 6061 T-6 aluminum.
•All aluminum parts are Type III hard coat anodized matte black per mil-spec.
•All edges have been softened and rounded for the shooters comfort and safety.
•Weight: 4.5 oz.
The Aimpoint Micro T-1 and H-1 are great tactical scopes; however, they have a downside. The scope design does not accommodate flip-up lens covers; and you cannot purchase any that fit. Yes they come with the bikini lens covers, but most individuals will lose those in the first month, and they are not the easiest lens covers to remove, keep in place or reinstall. GG&G developed a very unique solution, the Aimpoint Bolt On T-1 and H-1 Mount which includes a built-in provision that provides for the installation of a flip-up lens cover for the ocular end. In addition, the kit also includes a specially prepared flip up lens cover that fits the objective lens. The Aimpoint QD T-1/H-1 Scope easily and solidly installs onto the lightweight GG&G Aimpoint T-1/H-1 Bolt On Mount With Integral Lens Covers with four 3mm screws. The installation wrench is included in the kit.
Aimpoint T-1/H-1 Bolt On Mount With Integral Lens Covers Specifications:
Easily installed.
Ergonomic design.
Both the Aimpoint T-1 Mount and H-1 Mount provide a solid bolt on squeeze rail mounting system with a single recessed side bar and recessed socket head cap screw.
The Aimpoint Mount includes a custom prepared lens cover for the objective lens and an integral lens cover for the ocular end of the scope.
The Aimpoint T-1/H-1 scopes easily install onto the T-1 Mount and the H-1 Mount with four 3mm screws. The installation wrench is included.
Designed to mount directly to the AR-15/M16 upper receiver’s dovetail. This location places the red dot just above the front sight post.
The Aimpoint T-1 Mount is low enough to allow "Absolute True Co-Witnessing" with back up iron sights like the GG&G A2 BUIS and MAD BUIS.
The T-1/H-1 Mount With Lens Covers is manufactured from solid billet 6061 T-6 aluminum.
All aluminum parts are Type III hard coat anodized matte black per mil-spec.
All edges have been softened and rounded for the shooters comfort and safety.
The Aimpoint Micro T-1 and H-1 are great tactical scopes; however, they have a downside. The scope design does not accommodate flip-up lens covers; and you cannot purchase any that fit. Yes they come with the bikini lens covers, but most individuals will lose those in the first month, and they are not the easiest lens covers to remove, keep in place or reinstall. GG&G developed a very unique solution, the Aimpoint Bolt On T-1 and H-1 Mount which includes a built-in provision that provides for the installation of a flip-up lens cover for the ocular end. In addition, the kit also includes a specially prepared flip up lens cover that fits the objective lens. The Aimpoint QD T-1/H-1 Scope easily and solidly installs onto the lightweight GG&G Aimpoint T-1/H-1 Bolt On Mount With Integral Lens Covers with four 3mm screws. The installation wrench is included in the kit.
Aimpoint T-1/H-1 Bolt On Mount With Integral Lens Covers Specifications:
Easily installed.
Ergonomic design.
Both the Aimpoint T-1 Mount and H-1 Mount provide a solid bolt on squeeze rail mounting system with a single recessed side bar and recessed socket head cap screw.
The Aimpoint Mount includes a custom prepared lens cover for the objective lens and an integral lens cover for the ocular end of the scope.
The Aimpoint T-1/H-1 scopes easily install onto the T-1 Mount and the H-1 Mount with four 3mm screws. The installation wrench is included.
Designed to mount directly to the AR-15/M16 upper receiver’s dovetail. This location places the red dot just above the front sight post.
The Aimpoint T-1 Mount is low enough to allow "Absolute True Co-Witnessing" with back up iron sights like the GG&G A2 BUIS and MAD BUIS.
The T-1/H-1 Mount With Lens Covers is manufactured from solid billet 6061 T-6 aluminum.
All aluminum parts are Type III hard coat anodized matte black per mil-spec.
All edges have been softened and rounded for the shooters comfort and safety.